Grease penetration tester LinteL PN-10 (equipment C)
Apparatus for determining the penetration of greases
Description
- Implemented standards: GOST 5346-78, GOST ISO 2137
- LinteL PN-10 allows you to set the following test conditions:
– penetration time in increments of 1s;
– delay time before penetration is performed in steps of 1s.
- The device determines the penetration value with an error of no more than ±0.05mm
- The device is equipped with a built-in illuminator that helps determine the moment the cone touches the product being tested
- The device provides storage of up to 9 determination results with calculation of their average value
- Integration with the LinteL Link data collection system allows you to collect and transfer laboratory test results from the device to a personal computer via wireless communication. Integration with the laboratory information system Lintel LIS provides comprehensive automation of laboratory activities
- Control of table movement in three modes: slow table lift, fast table lift, fast table return
- Display on the display in standby mode: the number of the last test performed; a given number of tests; table lifting speed; specified penetration time; specified delay time
- Display on the display during the test: the number of the last test performed; a given number of tests; penetration time (countdown); current penetration value
- The four-line OLED display provides an intuitive user interface with all the information you need while testing and viewing results.
- Full self-diagnosis system with indication of the causes of malfunctions on the display
- Stopping the test process at the end of the analysis with an audible alarm
|
Safety |
|
|
Sound accompaniment |
Sound signal when the test is completed or a malfunction is detected |
|
Diagnostics and setup |
Built-in self-diagnosis and configuration algorithms, notifying users about the causes of malfunctions |
Additional information
